Inconel® is a nickel-based alloy with superior corrosion resistance and temperature performance to stainless steel. Inconel® Bellows using edge welded technology are designed for applications that require excellent corrosion resistance properties, such as valve or down-hole tool applications that are exposed to hydrogen sulfide. Stainless steel Bellows manufactured from alloys such as 321, 304, 304L, 316, and 316L are typical. However, for higher stress applications that apply extreme temperatures or pressures on parts, the best solution is often Inconel Bellows. Bellows made of Inconel 600 or 625 not only have higher temperature and pressure tolerance, they actually harden and become stronger over time, due to the material’s unique properties.
Boan International in renowned Manufacturer of Inconel Bellows in India. We have supplied Inconel Single Bellows to Gasco, Inconel flex bellows to Saudi Aramco, Inconel exhaust bellows to Oman etc.
We have more than 8 years of experience in supplying Inconel exhaust bellows & Inconel flex bellows. If you are looking for Inconel flex bellows feel free to contact at [email protected] for any assistance.
Inconel Bellows Specification
|Material||Alloy 625 (Inconel® 625)+ or Alloy 718 (Inconel® 718)+, Alloy X750 (Incone®l X750)|
|Thickness||0.004" and up every 0.001"|
|Standard Leak Rate||<1×10-5 std CC He/sec|
|Outside Diameter||0.358" (9.0932mm) to 22.205" (564mm)*|
|Inside Diameter||0.198" (5.029mm) to 19.921" (505.99mm)*|
|Shapes||Round standard. Non-Round Available; Contact Factory.|
|Length||Up to 96 inches (244 cm)|
|Grades||600, 601, 625, 690, 713C, 718, 751, 792, 939, 188, X-750, 230, 907, 909, 706, 617|
*For other dimensional requirements, contact the factory
|Oil & Gas||Excellent Corrosion Resistance|
|Test Stands||High Strength|
|High Temperature Exhausts||High Temperature|